Tuesday, June 3, 2014

Solar PV Inverter Problems On The Rise

Solar PV Inverter Problems?
Have you got or had problems with your solar power inverter? If so you will obviously know how costly that was in lost revenue!

Like any new appliance in the home, when a solar pv system is installed it's frequently checked on a daily or weekly basis initially.

Our research is showing, it is not taking long for this solar inverter checking, to soon be forgotten. Couple this with a little knowledge of the electricity bill and power analysis and there is a recipe for disaster.

It is therefore quite easy to see how a solar inverter that has problems, can go unnoticed for sometime. After all there is no alert system!

Solar inverter problems can cost you dearly, with either NO Gross FIT credit, or NO Net FIT electricity offsetting or exporting.

There are many reasons problems may occur with a solar systems inverter such as,

  • Shoddy Installation - A symptom of a shoddy solar power installation can often be where a household's energy bill does not change after the install. We will assume here the usage patterns have remained the same, as before the install. Commonly the post solar electricity bill will show little reduction of the total power cost. Your system may not be generating the required power to offset your imported power. It could even be not offsetting but exporting your power!
  • NET Meter – The choice or install of the NET meter may be affecting the gain of your solar power installation. We discuss this in depth on our SOLAR NET METERING page on our website.
  • Quality Of Inverter - You may have bought a rather inefficient badly designed cheap solar inverter, where the quality is to blame. The panels may not be matched best to the particular model of inverter and also be suffering from quality and design issues.
  • No Sunny Hour Usage - You may not be using as much power as was estimated, during the sunny hours of the day. With NET metering you could be simply exporting most of the power back to the grid for little return, as you are not using it. See our NET FIT METERING &BILLING page on our website for more details.
  • Act Of Nature – Lighting can easily create a malfunction with any solar inverter. Note this kind of damage is NOT covered by warranty. So make sure the solar power system is added to the home insurance. This usually costs little, just needing to be listed to be covered.
  • Maths – You may have not understood the maths for the reason you initially installed the solar power system. 
  • Other Causes - Unprofessional practice of many types, which has occurred in the past it seems.


If you are one of the householders whom have had issues with any of the above or are now thinking twice, then we have a solution. Yes you need to install a simple monitoring system to keep you alerted of what is happening on your roof. 
 
As we know you will have placed considerable finance into your solar power investment, it only makes sense to spend 'small change' to keep the investment on track.

And if you want to save further, our ELECTRICITY MONITORING SYSTEMS allow you to see also your electricity consumption under the roof. Helping you to save more and offset the cost of the solar power monitoring solution.

This blog post brought to you by Aussie Home Energy, a major player in the HOME ELECTRICITY REDUCTION SERVICES industry in Australia.

Where Cheap Electricity Monitors Fail

There is almost a plague of cheap electricity monitors out there on the internet these days. When we first started researching for reliable accurate electricity monitoring solutions, back in 2009 it was a completely different story.

The concept behind monitoring electricity is to create an awareness of what is going on with electricity usage and costs. Minimum requirements for successful electricity monitoring are therefore,


  • Accurate data
  • Varied methods of data output
  • Easy delivery of data to the user
  • 24/7 data updates
  • Data analysis

Additional requirements are not limited to,



  • Multiple circuits support by cable clamp or plug-in transmitters
  • Easy to see 'at a glance' a large LCD screen full of important data
  • PC, online or mobile app data analysis and power alerts
  • Reliable and robust hardware
  • Manufacturer / distributor support

Two of the biggest failures with cheap electricity monitors, are the hardware design and reliability. Add to this the flexibility of being able to support the needs of the end user. Simply put, some of the cheap electricity monitors only meet a very limited number of the user's needs.

The hardware chosen needs to be reliable, easy to install, robust, proven, well supported by documentation and supported by any customer service that gets an issue fixed fast.

So let us look at some of the reasons, why cheap electricity monitors are not worth the gamble.


This list is compiled from our research and that of our electricity monitoring clients, whom have in some cases been duped by these inferior energy monitors.

  • No mains power option for the monitor, meaning a total reliance on AA / AAA batteries
  • Battery life is very short, with no alert to any 'battery low on life' issue
  • Leaking batteries when not changed quickly, resulted in end of life, for the monitor
  • Difficult to understand documentation
  • Unreliable pairing of the transmitter to the electricity monitor
  • Range of transmission poor, due to lack of frequency strength
  • Inferior electronic components
  • Pairing and transmission of data, easily affected by electronic interference in the home
  • Portability issues due to a lack of mains power, meaning the monitor is easily mislaid or damaged in the home
  • No fixed place in the home for easy proven 'at a glance' monitoring, where everyone can see the monitoring data and act if so
  • Flimsy easy to break cable clamps, with inferior plugs and sockets
  • Cable clamps that only support a small power rating, before the range of error increases
  • Transmitter to monitor transmit frequencies to long, meaning data is inaccurate
  • Certain features not relevant for Mr. Average, such as total current
  • One appliance / circuit ONLY supported, meaning home total electricity only
  • No USB connection for PC data analysis
  • Software application of poor quality, with cable driver issues
  • No option to get the data online
  • Limited online portals, with monthly costs

What we are finding is this list of issues with cheap electricity monitors, is still increasing from our own research and that of our monitoring clients, whom were duped by these cheaper alternatives.

A lot of these issue could be simply fixed you would think by good Q & A.

Three classics failures that come to mind are,


  • Cheap Electricity Monitor #1 supported alkaline batteries or mains power via an adaptor. Problem being the electronics charged the batteries which resulted in battery leakage [on a varnished table] and the risk of fire, due to the heat of the batteries. The manufacturer was very happy indeed to hear of that failure. It seems though little was done with the design and there was a lack of product recall.
  • Cheap Electricity Monitor #2 used a flip out stand to sit on the desk for easy visuals. When connected to a PC for analysis, the monitor could not be supported by the stand due to the USB being sited at the base. Problem being bad design / position of USB port.
  • Cheap Electricity Monitor #3 could have the transmission frequency from the transmitter to the monitor set from 6 seconds to around 5 minutes! The 6 second frequency which is quite a standard these days, resulted in the transmitter's batteries failing in a month. And at 5 minutes the data at the end of the exercise would be useless.

At the end of the day, you simply get what you pay for when it comes to any successful ELECTRICITY MONITORING SOLUTION.  


This blog post brought to you by Aussie Home Energy, a major player in the HOME ELECTRICITY SAVING SERVICES industry in Australia.

Alternative Uses For 50W Of 24/7 Wasted Standby Power?

Powered byEMF Web Form